Smart city systems, put in while the trenches are still open
Networks, metering, lighting, mobility and sensing designed into a development from the masterplan, integrated on open standards, and operated afterwards by people who are accountable for keeping them running.
Infrastructure first, dashboards second
The cheapest day to install a smart city layer is the day the ground is already open. Ducts, conduit, power routes and fibre cost very little inside the civils package and cost a great deal once the roads are surfaced, the kerbs are set and the landscaping has gone in.
That is why this belongs at masterplan stage rather than as a retrofit. We work with the infrastructure engineers while the drawings are still moving, so the routes, chambers, power supplies and mounting points exist before anyone has decided which sensors go on them.
What goes on top is chosen to keep you free. Open protocols, documented interfaces, exportable data and hardware you can re-tender: a platform that traps your data is a liability disguised as a feature, and you should be able to replace us without replacing the city.
The part that decides whether any of it still works in three years is operations. Someone has to watch the dashboards, patch the firmware, replace failed nodes and answer for uptime. We do that under an agreement with response times in it, or we train and hand over to your team — but we will not pretend the question does not exist.
Why choose AXION for smart city work
-
Designed in at masterplan stage
Ducts, chambers, power and fibre routes into the civils drawings, before the roads are surfaced.
-
We build the buildings too
The same division delivers the housing and facilities, so the systems and the structures are coordinated by one team.
-
Open standards, no lock-in
Documented interfaces and standard protocols, so hardware and software can be re-tendered without rebuilding.
-
Your data stays yours
Ownership, residency, export format and retention written into the contract, not into a supplier's terms of service.
-
Privacy engineered in
Systems specified with your authority against the data protection law that applies, with collection limited to what the service needs.
-
Phased so it can be afforded
Passive infrastructure first, then the layers that earn their keep, added later without reopening the ground.
-
Built to be operated
Control room, runbooks, training and a support agreement with response times, because unattended systems go dark.
-
One accountability line
A single integrator across networks, devices and platform, so a fault is ours to find rather than yours to arbitrate.
What we deliver
Whole districts, and the individual layers that can be added to one.
- Fibre backbone & duct networks
- Street lighting & smart poles
- Energy metering, solar & storage
- Water metering & leak detection
- Waste collection monitoring
- Parking, access & EV charging
- Traffic & mobility systems
- Environmental & air quality monitoring
- Building management integration
- Control rooms & operations centres
- Resident & municipal service portals
- Master-planned community infrastructure
What comes as standard
-
Passive infrastructure sized for later
Ducts, chambers and pole positions specified with spare capacity, so the next phase pulls cable instead of digging.
-
Segmented, secured networks
Operational systems separated from public and corporate traffic, with access control and a patching regime from day one.
-
Metering that reconciles
Energy and water metering with the billing and reporting exports your finance and utility teams actually need.
-
Lighting under control
Zoned and scheduled street lighting with fault reporting, so a dark street raises a ticket instead of a complaint.
-
One platform, many systems
Devices and subsystems brought into a single management view, with alarms routed to whoever is on shift.
-
Documented interfaces
APIs, data schemas and integration notes handed over as deliverables, so your next supplier can pick it up.
-
Resilient by design
Backup power for critical nodes, redundant links where the service warrants it, and defined behaviour when a link drops.
-
Trained operators at handover
Runbooks, fault trees and training for your team, with as-builts and asset registers that match what is in the ground.
How the systems are built
Standard approach and systems. Coverage, device selection, capacities and service levels are set per project against your masterplan, your authority's requirements and the regulations of the jurisdiction, and confirmed on the approved drawings.
- Delivery approach
- Designed with the masterplan and civils packages, installed in phases with the ground works
- Passive infrastructure
- Duct routes, chambers, pole and cabinet positions with spare capacity for later phases
- Network
- Fibre backbone with wireless and low-power device networks where they suit the service and the distances
- Power & resilience
- Supplies, protection and backup for critical nodes, with defined behaviour when a link or supply drops
- Metering
- Energy and water metering with data collection, validation and export to your billing and reporting systems
- Lighting
- Zoned control, scheduling and fault reporting across the street lighting network
- Mobility
- Parking, access control, EV charging and traffic systems, integrated to the platform where the authority permits
- Environmental monitoring
- Air quality, noise, weather and water sensing selected for the parameters your authority reports on
- Safety systems
- Lighting, emergency call points and monitoring specified with your authority, against the privacy law of the jurisdiction
- Platform
- Single management view across subsystems, with alarms, roles, audit logging and reporting
- Interoperability
- Open protocols and documented APIs and data schemas, issued as handover deliverables
- Data governance
- Ownership, residency, retention, access rights and export format defined with you and written into the contract
- Cybersecurity
- Network segmentation, access control, credential management and an agreed patching and update regime
- Phasing
- Passive first, active layers added by phase without reopening completed ground
- Operations & support
- Monitoring, maintenance and response times under a support agreement, or training and handover to your team
- Handover
- As-builts, asset register, runbooks, fault trees, credentials and training records at practical completion
All dimensions are nominal and confirmed on the approved drawings for your project.
A look at the work
Infrastructure, control rooms, lighting and district views from delivered projects.
Take the detail with you
Start your project
Send the site details and the brief. You will hear back shortly with next steps and an indicative range.